Completed work for the past few months

Although I have not been blogging since the last few months, but my gunplay building had stopped. This post will include some of the kits which I have done. My kits ranged from series as recent as Age series to the Turn A series. I like getting the kits with disregard to their age.

First is the Age FX Gundam. Although the series leaves much to be desired, but the kit is pretty awesome. This kit provide a stand to house its dragoon bits as to give it a look as if the bits are suspended in mid-air. Personally this kit is one of my favourites in the series.

Work in progress BB Senshi Sangokuden SD Kyoui Gundam F91 - Part 2

As continued from the earlier post, I continued working on the SD Kyoui Gundam F91. The basic form was completed earlier. So next up are the armor and the weapons. The first step is assembling the helmet which the parts have been painted earlier.

Parts of the helmet

Work in progress BB Senshi Sangokuden SD Kyoui Gundam F91 - Part 1

I got some free time over the weekend, thus is back to work on my backlog. As mentioned earlier, the focus is on the Sangokuden SD kits. This time I chose the SD Kyoui Gundam F91 to work on. It is quite an interesting kit as it is a Gundam but yet he can disguise as a Zaku II too.

Box cover

Work in progress BB Senshi Sangokuden SD Kakouenn Daras - Part 2

It is back to work on the SD Kakouenn after a night of rest. From the last post, I have already completed the basic form. This post will focus on the armor and the weapons.

Helmet

Parts of the helmet

Work in progress BB Senshi Sangokuden SD Kakouenn Daras - Part 1

My last kit was working on the SD Kakouton Giros.  During that WIP, I mentioned that I was going to work on his brother, SD Kakouenn Daras next. My next project is where I deliver my promise. If you have notice from the box art, Kakouenn Daras is quite similar to Kakouton Giros in terms of design.

Box cover

Work in progress - BB Senshi Sangokuden SD Kakouton Giros Part 2

As to continue from the last post, I was working on the Kakouton Giros from the Sangokuden series. Most of the parts were assembled and this post will mainly focus on assembling this parts together and of course, his sword.

Assembling the various body parts

Work in progress - BB Senshi Sangokuden SD Kakouton Giros Part 1

For the next project I am working on is the BB Senshi Sangokuden SD Kakouton Giros. Most probably I will focus on the Sangokuden series for some time as I have to clear my backlog fast. And the fastest kits to clear are the Sangokuden series kits. Now on with the introduction work.

According to the three kingdoms story, he is one bad ass tough guy. It is said that when his eye was struck by an arrow, he pulled the injured eyeball out and ate it himself. Brrr.... that is one gross guy. Anyway we proceed with the deboxing.

Deboxing

Box cover

Work in progress BB Senshi Sangokuden SD Shin Totaku Zaku Part 2 (Final)

As promised from the earlier post, I am now posting a photo gallery of the BB Senshi Sangokuden SD Shin Totaku Zaku as a conclusion to the build. This build is actually quite simple and straightforward. The kit itself actually has a dark feel to it, being of course one of the biggest baddies in the series.

Work in progress BB Senshi Sangokuden SD Shin Totaku Zaku Part 1

After some time out of touch with the Sangokuden series, it is time for me to be back to work with them. Who else to work on than the biggest baddie (literally) of all, the Shin Totaku Zaku. He is based on the Zaku I and the reason I bought him is because he comes with the Dragon Seal. That is a nice accessory to have, not to mention the clear effect parts.


DEBOXING

Box cover

Work in progress - MG Crossbone Gundam X1 Ver.Ka. Part 7

Due to a busy work schedule, I have not been able to work much on the X1 recently. As seen from the last post, most of the X1 has been completed with exception to the weapons. Therefore this post will be mainly on the weapons itself. The most interesting item that the X1 possess is the anti-beam cloak. More on that later.

Assembling the beam rifle

it needs some painting

After the paint job

Assembling the pirate sword handle

Adding some black paint to it

The pirate beam sword is my favourite weapon for the X1 as the design is exclusive to the Gundams in the Crossbone series as compared to your run-of-the-mill beam sabers

Both the weapons

The twin daggers

X1 with the daggers

Freeze! Hands up, punk!

Looks like some bloke from a pirate movie...

One of the interesting items that the Crossbone Gundams in the Crossbone series possess is the anti-beam cloak. They help to repel beam attacks keeping the Gundam safe. They are lightweight and less costly to replace as opposed to the anti beam shields. The downside of them is that they only can withstand a few hits before being destroyed.

With the cloak on

Obviously the next phase of the build is on the applying of the decals. Just looking at the amount of the decals alone really gives me a headache. Will put it off for a while until I have the mood for it. XP

the decals

Anyway, the shopping bug hit me again when I walked into a Gundam fair in Toys'R'Us at Vivocity during the weekend. They were clearing their gunpla giving discounts at up to 70% off. How can I let go of this chance, I ask myself. What is more, there were also limited edition of Gunpla on sale. At the end I got myself 3 kits in all.

The loot at the end of the day



Tensyoryu Komei v Gundam at SGD$15




Asurao Mokaku Gundam, Syukuyu Gundam, Kyoshin Elephant Set at SGD$20




Gunpla Builders Sazabi GPB colour Limited edition at SGD$59.95

 For the Sangokuden Gunpla, I have been eyeing them for quite sometime, so with the sale on, I quickly grabbed hold of the chance to add them to my collection. For the Sazabi GPB Colour, I have been an avid collector of the Gunpla Builder series, so I also cannot miss the chance to add it to my collection.
I guess my gunpla addiction serves me well this time XD

Related posts:

Work in progress - MG Crossbone Gundam X1 Ver. Ka. Part 1
 WIP Crossbone Gundam X1 Ver. Ka. Part 2
WIP - MG Crossbone Gundam X1 Ver. Ka. Part 3
Work in progress - MG Crossbone Gundam X1 Ver.Ka. Part 4
Work in progress - MG Crossbone Gundam X1 Ver.Ka. Part 5
Work in progress - MG Crossbone Gundam X1 Ver.Ka. part 6

Work in progress - BB Senshi Sangokuden SD Souhi Gundam Part 3 (Final)

With the completion of the SD Souhi Gundam, I conclude the WIP with some photos taken with Kanu Gundam making a cameo appearance.

Double welding swords

The third sword possesed by Souhi Gundam

The two swords can be combined into a bigger weapon

Kanu Gundam makes an appearance

That is the end of the BB Senshi Sangokuden SD Souhi Gundam WIP. For the next project, I am seriously thinking  of doing a MG kit. I have not fixed a MG kit for over 2 years I think. I have been concentrating on Sangokuden kits and HG kits due to the huge backlog. My last MG kit  was the Hyaku Shiki shown as below (Will be doing a post of it in the future if the chance arises) .

If I were to start on a MG project, which of these currently in my back log shown below would you recommend me to build?

ZZ Gundam

Shining Gundam

F91 Gundam

Crossbone Gundam X-1 Ver. Ka. 

Hmmm.... What do you think?
XD

Related posts:

Work in progress - BB Senshi Sangokuden SD Souhi Gundam Part 1

Work in progress - BB Senshi Sangokuden SD Souhi Gundam Part 2